Richiedete un preventivo
Contattateci

MFLI

Amplificatore lock-in 500 kHz / 5 MHz

Caratteristiche principali

  • Analizza, genera e controlla segnali da DC a 500 kHz o 5 MHz
  • Misurazione precisa segnali di corrente e di tensione
  • Misure veloci e basso rumore di ingresso
  • Configurabilità con ingressi/uscite ausiliarie multiple
  • Set di strumenti di LabOne® inclusi Oscilloscopio, Sweeper e Analizzatore di spettro
  • Espandi il tuo set di strumenti con opzioni di aggiornamento

Variants

Prezzo

CHF 6,290

Pricing shown is ex-works Zurich and only valid for the selected region

Any questions? Contattateci for pricing information

Documentazione

Download Software

Lo strumento MFLI di Zurich Instruments è un amplificatore lock-in digitale che copre la gamma di frequenze da DC a 500 kHz (con possibilità di estensione fino a 5 MHz). Grazie ai suoi server dati e web incorporati, lo MFLI può essere utilizzato direttamente su qualsiasi dispositivo che abbia un browser web senza ulteriori installazioni di software. Grazie ai front-end analogici e digitali accuratamente sviluppati e all'elaborazione digitale veloce resa possibile dalla FPGA integrata, lo MFLI combina le sue eccellenti prestazioni con l'interfaccia utente LabOne.

Related Publications

M. Houot, Z. Qiao, B. Hu, D. Nodari, F. Furlan, F. Aniés, Y. Yang, M. Heeney, A. A. Bakulin and N. Gasparini

The Dynamics of Interfacial Trap States in High-Detectivity Near-Infrared Photomultiplication Organic Photodetectors

Advanced Functional Materials

DOI: https://doi.org/10.1002/adfm.202518210

Matilde Brunetta et al.

Selective Charge Extraction Allows Fast Photomultiplication and Imaging in Rigid and Ultra-Flexible SWIR Organic Photodiodes

Advanced Energy Materials

DOI: https://doi.org/10.1002/aenm.202506776

Valentin Fonck, Mohammadali Razeghi, Jean Spiece, Phillip Dobson, Jonathan Weaver, George Ridgard , Grayson Noah and Pascal Gehring

Characterization of Heat Transfer in 3-D CMOS Structures Using Sideband Scanning Thermal Wave Microscopy

IEEE Xplore

Link to paper

Ma, H., Chen, Y., Qiao, S., He, Y., & Ma, Y.

A high sensitive methane QEPAS sensor based on self-designed trapezoidal-head quartz tuning fork and high power diode laser

Photoacoustics 42, 100683 (2025)

DOI: https://doi.org/10.1016/j.pacs.2025.100683

Zhiyu Feng a,b , Chaotan Sima a,b,* , Tailin Li a,b, Wenzhe Wang a,b, Yufeng Pan a,b, Lihua Wang c, Zhiwen Ming d, Ping Lu

Highly-sensitive photoacoustic gas sensor with dual resonant modalities for simultaneous NO and NO2 detection

Sensors and Actuators B: Chemical, Volume 434, 1 July 2025, 137596

DOI: 10.1016/j.snb.2025.137596

MF-F5M

Frequency Extension

Zurich Instruments MF F5M Frequency Extension

Caratteristiche principali

  • Extends the frequency range of a 500 kHz MF instrument from 500 kHz to 5 MHz
  • Field-upgradeable option
  • Compatible with other options
Per saperne di piùRichiedete un preventivo

MF-MD

Multi-Demodulator Option

Zurich Instruments MF MD Multi Demodulator

Caratteristiche principali

  • 4 demodulators instead of 1
  • 4 oscillators instead of 1
  • 2 impedance measurement units instead of 1 on the MFIA
  • 2 external reference PLLs instead of 1
  • Field-upgradeable option
Per saperne di piùRichiedete un preventivo

MF-MOD

AM/FM Modulation Option

Zurich Instruments MF MOD AM/FM Modulation

Caratteristiche principali

  • Simultaneous amplitude modulation and demodulation
  • Simultaneous frequency modulation and demodulation
  • Adjustable filter settings for each frequency component
  • Sideband separation (single-sided modulation)
  • Analysis of higher-order sidebands and multiple carrier frequency
Per saperne di piùRichiedete un preventivo

MF-PID

Quad PID/PLL Controller Option

Zurich Instruments MF PID Quad PID/PLL

Caratteristiche principali

  • 4 independent PID controllers with PLL capability
  • PID Advisor (for adjustment of target bandwidth)
  • Auto Tune PID (for minimization of average PID error signal)
  • 50 kHz maximum loop filter bandwidth
  • Phase unwrap for demodulator phase data (± 1024 π)
  • Low-pass filter for derivative branch
Per saperne di piùRichiedete un preventivo

MF-DIG

Digitizer Option

Zurich Instruments MF DIG Digitizer

Caratteristiche principali

  • Dual-trace oscilloscope with 16 bits, 60 MSa/s, FFT
  • 2.5 MSa memory per channel
  • 7 MHz input bandwidth
  • 30 MHz FFT span, 1 M points
  • High-definition mode HD24
  • Segmented and continuous digitizing
  • Hardware trigger engine with additional trigger inputs and outputs
  • LabOne® user interface and API integration
Per saperne di piùRichiedete un preventivo

MF-IA

Impedance Analyzer Option

Zurich Instruments MF IA Impedance Analyzer

Caratteristiche principali

  • 1 mHz to 500 kHz / 5 MHz, 1 mΩ to 1 TΩ
  • 0.05% basic accuracy
  • Compensation Advisor and Confidence Indicator
  • LabOne® Sweeper tool for frequency, bias voltage, and test signal amplitude response measurements
  • LabOne APIs for Python, C, MATLAB®, LabVIEW™ and .NET
Per saperne di piùRichiedete un preventivo

MF-BOX

Boxcar Averager Option

Option Box MF-BOX

Caratteristiche principali

  • 1 boxcar averaging unit
  • Input selectable between Voltage or Current Input
  • Up to 500kHz/5MHz repetition rate
  • Zero acquisition dead time
  • Baseline suppression and differential measurements
  • Up to 1 million averaging periods
Per saperne di piùRichiedete un preventivo