Innovation in Photonics, Materials, and Sensor Research with the VHFLI Lock-in Amplifier – Webinar Q&A
March 19, 2026 by Gustavo Ciardi
Are slow measurements, weak signals, or overly complex setups holding back your research? That’s exactly what we set out to address in our recent webinar. We introduced the VHFLI Lock-in Amplifier: the successor to the HF2LI and the newest addition to the Zurich Instruments lock-in amplifier portfolio.
If you want to watch the webinar recording, you can find it on our YouTube channel at this link.
In a conversational Q&A format, we explored:
- Market positioning & budget flexibility: The VHFLI is designed to cater to the needs of a very diverse set of customers and their applications, with a product that can be tailored to their needs and budgets. The base version is priced very close to the price of the base HF2LI.
- Portfolio sweet spot: Frequency-wise, the VHFLI covers the DC - 50 MHz / 200 MHz frequency range, sitting between the MFLI and the GHFLI, a range that sees many different applications in photonics, surface science, material science, and sensor development. Beyond frequency, the VHFLI brings technology that was never present at these frequencies, like differential voltage inputs and outputs, current inputs, impressive noise performance, and a very large maximum measurement bandwidth.
- Hardware & signal integrity: The VHFLI is equipped with a set of inputs and outputs ideal, for instance, for many different types of sensors: differential voltage output and input, an integrated current input with a powerful transimpedance amplifier -- times two because of the two channels, plus two high-quality auxiliary inputs. With the multi-demodulator option, the VHFLI gets 8 demodulators, so all these signals can be measured in parallel, with demodulators still available for harmonics analysis.
- Ultra-low noise performance: Our engineers have spent considerable time ensuring the best analog performance possible. One of the outcomes is a very flat noise floor of around 3 nV/√Hz, starting from just a few tens of kHz. In addition, the VHFLI has demodulators with low-pass filters with a minimum bandwidth of just a few mHz, to remove noise when the signal SNR is very low to start with.
- Speed & measurement bandwidth: The VHFLI has a minimum time constant of only 14 ns, allowing the demodulators to capture events that are only a few tens of nanoseconds in duration, a very powerful tool in photonics, MEMS, and material development. Crucially, a very small time constant is quite useless if you cannot capture enough data to make use of it; that's why the VHFLI is capable of triggered acquisition with a data rate up to 25 MSa/s.