Skip to main content
Search

Dielectric Spectroscopy

Related products: MFLI + MF-IA

Application Description

Dielectric spectroscopy is a form of impedance spectroscopy where the dielectric properties (dielectric constant and dissipation factor) of a medium or sample are characterized as a function of frequency. A dielectric is an electrical insulator with very low conductivity at DC; because of its polarizability, however, a dielectric can store charges in the low or mid-frequency range. This capacitive effect makes dielectrics useful for charge storage and dissipation. Applications of dielectrics include:

  • Low-loss electrical components
  • Energy storage devices such as batteries and supercapacitors
  • High-k and low-k gates in semiconductor devices
  • Piezo- and ferro-electric sensors and transducers

An impedance study of dielectrics is needed to fully understand the material physics as well as to optimize device performance.

Measurement Strategies

Dielectric characterization is carried out on a sample with well-defined geometry contacted with two electrodes. Typically, this is achieved with a parallel-plate fixture (see Figure 1) or an immersion probe with a specific electrode area and spacing. Based on this geometry, R||C or D||C equivalent circuit models can be established, and the dielectric constant (permittivity) is extracted as a result. A fixture such as the one shown in Figure 1 is often combined with a Q meter or an instrument based on an auto-balanced bridge. However, these instruments prohibit measurements at low frequencies and at high impedance.

Dielectric spectroscopy setup featuring the Zurich Instruments MFIA

Figure 1: Sketch of the MFIA with a third-party dielectric test fixture where a disc sample is inserted between the electrodes. The grey box represents a third-party optional cryostat or furnace chamber that can house the fixture for temperature-dependent tests.

Impedance, phase, dissipation factor and capacitance vs frequency for a dielectric sample characterized with the MFIA

Figure 2: Impedance, phase, dissipation factor and capacitance (from top to bottom) of a dielectric sample are shown as a function of frequency. The data were acquired with the LabOne Sweeper module in dual-plot mode.

Dielectric sample probed at 10 Hz with the Plotter module of LabOne and using the one-period averaging feature

Figure 3: Dielectric sample probed at a fixed frequency of 10 Hz with the LabOne Plotter module, using the one-period averaging feature. From top to bottom, the traces with real-time statistics and histogram correspond to absolute impedance, phase, dissipation factor and capacitance.

Direct I-V measurements using phase-sensitive lock-in detection represent an attractive way to overcome the limitations affecting dielectric characterization. The MFIA Impedance Analyzer can measure impedance accurately up to 1 TOhm while maintaining an excellent phase accuracy of 2 mdeg. Dielectric spectroscopy can be performed straightforwardly with the LabOne® instrument control software and its Sweeper module (see Figure 2). To study the temporal evolution of the dielectric properties, it is possible to take advantage of the LabOne Plotter (see Figure 3) or Data Acquisition (DAQ) modules to carry out measurements in the time domain. These tools also support temperature-dependent studies, where the MFIA can be integrated with a cryostat or furnace. For low-frequency experiments, test signals from 5 MHz down to 1 mHz can be set in all LabOne modules, including the Sweeper (see Figure 4).

The Sweeper module of LabOne

Figure 4: LabOne Sweeper module in dual-trace mode showing the absolute impedance (upper window) and the phase and capacitance (lower window) for an airgap capacitor. The animation is run at a speed x1000.

Product Highlights

MFIA 500 kHz / 5 MHz Impedance Analyzer

  • 2- and 4- terminal configurations
  • Wide impedance range between 1m Ω to 1 TΩ
  • Wide frequency range: 1mHz-5MHz
  • Included user compensation
  • Faster low frequency characterization via one-period averaging
  • API programming support for Python, MATLAB, LabVIEW, C, .NET

The Benefits of Choosing Zurich Instruments

  • You can measure your dielectrics over a wide frequency range down to 1 mHz and over a broad range of impedance values up to 1 TOhm.
  • Save time by expediting low-frequency measurements thanks to the one-period averaging feature.
  • Determine real-time equivalent circuit parameters without time-consuming sweeps.
  • Have high confidence in the obtained results thanks to the excellent phase accuracy of the MFIA and the low baseline of its dissipation factor.
  • Integration into existing dielectric testing setups is straightforward thanks to the LabOne APIs.

Start the conversation     Get a quote

Videos

Dielectric Spectroscopy of Liquids

Dielectric Spectroscopy of Liquids

Deep Level Optical Spectroscopy

Deep Level Optical Spectroscopy | Impedance Measurement

What Makes a Great Impedance Analyzer?

What makes a great Impedance Analyzer?

Dielectric Spectroscopy of Thin Films

Dielectric Spectroscopy of Thin Films | Impedance Measurement

Related Webinars

Hands-on Electrochemical Impedance Spectroscopy

Hands-on Electrochemical Impedance Spectroscopy | Zurich Instruments Webinar

Impedance Analysis: Measuring Low and Fast

Impedance Analysis: Measuring Fast and Low I Zurich Instruments Webinar

Related Blog Posts

Contact Us