Welcome to the Q4/2019 newsletter!
To finish the year on an insightful note, here is some new content brought to you by our application scientists.
- Video: AWG Real-time precompensation
- Blog Post: How to generate QAM signaling with the HDAWG Arbitrary Waveform Generators
- Blog Post: AWG precompensation for high-fidelity CZ gates in transmon qubits
- Blog Post: Pseudo-random number generator in the run time of AWGs
- Interview: Prof. Christoph Stampfer, RWTH Aachen
- Blog Post: A deep dive into data acquisition with the LabOne DAQ tool
Company & Community
We hope that you enjoy reading this newsletter. Best festive wishes from Zurich!
Video: AWG Real-time precompensation
Precompensating the transfer function of a real-world setup is crucial for many AWG users. Our latest video on the Zurich Instruments YouTube channel presents the elegant solution we provide with the HDAWG-PC Real-Time Precompensation option. By showing real distortion examples, this video will help you set up this functionality.
Blog Post: How to generate QAM signaling with the HDAWG Arbitrary Waveform Generators
Quadrature Amplitude Modulation (QAM) is extensively used in telecom systems such as the 802.11 Wi-Fi standard. Thanks to its 2-dimensional modulation of both amplitude and phase, the QAM technic has also found applications in areas such as multi-qubit quantum computing. In this blog post, Mehdi Alem shows how to generate QAM signals with the HDAWG Arbitrary Waveform Generator and how to acquire the constellation diagram and eye pattern of various QAM signals using pseudo-random binary sequence streams.
Blog Post: AWG precompensation for high-fidelity CZ gates in transmon qubits
How can you achieve high-fidelity and low-leakage quantum gates with AWG real-time precompensation? In this blog post, Chunyan Shi explains how M.A. Rol and collaborators from the Netherlands and Germany recently implemented a new type of conditional-phase gate (see the paper in Phys. Rev. Lett.). Through clever gate design and thanks to the Zurich Instruments HDAWG, they achieved fast (40 ns), low-leakage (0.1%), high-fidelity (99.1%) and repeatable gate operation in transmon qubits. Chunyan discusses the noise properties of the HDAWG and the contribution of the HDAWG-PC Real-Time Precompensation in achieving such an exceptional gate performance.
Blog Post: Pseudo-random number generator in the run time of AWGs
In this blog post, Claudius Riek demonstrates the flexibility of the LabOne AWG sequencer. He implements a Pseudo-Random Number Generator (PRNG) to generate phase jitter on a waveform in the run time. This approach requires a single waveform only, in contrast to the playback of waves precalculated with phase jitter. And yet this is only one example of what is possible with Zurich Instruments AWGs. The program execution during run time is very powerful and enables straightforward implementation of decision making, sequence branching, and waveform adaptation within the run time.
Interview: Prof. Christoph Stampfer, RWTH Aachen
Hi Christoph, we know you from the early days of Zurich Instruments when you were still at ETH Zurich. Back then, you worked on taming the wonder material graphene when you made the first graphene quantum dots. What changed since then? How has the field progressed?
Many things changed. When we started to make graphene quantum dots in 2007, graphene was still considered as a very new material. In particular, it was still the only two-dimensional material people worked with. It was only in 2010 that hexagonal boron nitride (hBN), a kind of insulating brother of graphene, entered the arena; now there are many available 2D materials including semiconductors, superconductors, ferromagnets and many more. And it took until 2013 for the dry-transfer process to get established, a real key step for making high-quality graphene-based devices. Moving from graphene on SiO2 to hBN/graphene/hBN heterostructures also improved dramatically the electronic quality of devices based on synthetic graphene, that is, graphene grown by chemical vapor deposition. Nowadays, we can routinely achieve room-temperature carrier mobilities on the order of 100’000 cm2/(Vs), outperforming all other known materials. This makes graphene a highly interesting material for applications in the area of high-frequency electronics and integrated opto-electronics. Within the EU Graphene Flagship project, major efforts have been taken to make this true; two years ago we also founded the Aachen Graphene & 2D Materials Center to bridge the gap from basic science to applications.
From a more fundamental point of view, I find it particularly interesting that – thanks to the weak van der Waals force – one can stack 2D materials nearly arbitrarily on top of each other. This allows researchers to make superlattices and to observe interesting physics connected to moiré patterns. More recently, superlattices with magic-angle – around 1.1 degrees – twisted bilayer graphene gave rise to superconductivity and interaction-induced insulating states. This really came as a surprise, and it is a prime example of how exciting modern solid-state physics can be. There is a significant research effort in this field right now. In Germany, for example, a Priority Programme on “2D Materials - Physics of van der Waals [hetero]structures” was established very recently.
What happened with graphene quantum dots – are you still working in this area?
After years of trying to obtain clean quantum dots in etched graphene nanostructures, one of the very few ways to confine electrons in this gapless material, we moved to bilayer graphene. In bilayer graphene, we can open a band gap by applying a perpendicular electric field, which breaks the inversion symmetry in this material and allows for electrostatic confinement of electrons. Actually, this had been known for many years but needed the introduction of hBN and of ultra-flat graphitic gates to get it to work in practice. Nowadays there are around three groups working on such systems, including Klaus Ensslin’s group at ETH Zurich and us, and it is fantastic to see how much cleaner this system is. We are now at the point where we can routinely achieve single-electron occupation in such quantum dots, and we are on the way to understand the system such that we can set out to benchmark its suitability for spin and valley qubits.
You have a full set of Zurich Instruments lock-in amplifiers: how do they help you in your work?
We are doing experiments on graphene-based nanoelectromechanical systems, including highly tunable graphene resonators; this is where we started using the UHFLI 600 MHz Lock-in Amplifier, as at the time no one else was offering such measurement frequency range. We now have two of them and are extending this type of experiments. We also have several MFLI Lock-in Amplifiers, which are used in the lab on several experiments on graphene and bilayer graphene quantum devices. Very recently, we also acquired an AWG from Zurich Instruments to help us understand the physics of potential spin and valley qubits in bilayer graphene.
This sounds fascinating – how did you get to this point in your career? Tell us about your journey as a scientist.
I have tried to escape science several times but in the end remained. I grew up in the German-speaking part of Italy (South Tyrol) and in the last 5 years of school I went to a technical high school where I enjoyed the training to become an industrial electronics technician. Fortunately, the graduation of this school allowed me to go to university; however, the Matura was not accepted by ETH Zurich in Switzerland and so I decided to go to Vienna to study electrical engineering at TU Wien. During my semiconductor devices course in the 2nd semester, my professor convinced me to study technical physics, which I did; I completed my degree with a master’s thesis in theoretical physics. To keep my plan to work in the field of microelectronics alive, I switched to mechanical and process engineering and went to Christofer Hierold’s group at ETH Zurich to do a PhD in micro- and nanosystems technology. I then moved from the department of mechanical and process engineering to the physics department and did my postdoc with Klaus Ensslin: that was the first time I worked at low temperatures. In 2009 I moved to Aachen, where I got a Junior-Professor position at RWTH Aachen University and Forschungszentrum Jülich. In 2013 I was fortunately promoted to full professor.
You also have an extended interest in educational aspects. Tell us a bit more about your physics app Phyphox.
Phyphox stands for physical phone experiments and it is an advanced sensor app that turns your smartphone into a small physics lab. This gives science teaching both at school and university level a completely new twist. This app really turns you into an explorer in no time, allowing you to do experiments and live out your curiosity. When preparing the 1st-semester introductory lectures on experimental physics in 2015, I asked myself, how can we motivate students to do experiments themselves? My experience is that watching experiments does not really reflect reality. This is how I started to experiment with the smartphone. The first experiment I did at home with my brother: we simply put the smartphone into a paper roll, let it roll around the floor and then analyzed the data. It was fantastic to see how quickly we got a nice and interesting set of data. We decided to make it more professional so that we could really use it in a kind of “flipped classroom” way for our experimental physics lectures.
The students like working with this app. The Phyphox App was released in September 2016. We now have more than 850.000 installations, and the app has been translated into 16 languages. It is free and we will keep it free. Actually, we just turned into an open-source project.
What do sport and art mean to you?
For me, sport and art are very much connected to science. I like sports in terms of competition, and I like to work and collaborate with sportive people. I think sport has some spirit that has a positive impact on motivation and healthy competition. In my childhood, I did ski racing for nearly seven years and the training connected with it has shaped me quite a bit. Art is also important as it is connected to creativity, which is important in science. I used to paint quite a bit, especially in Zurich during my PhD when I was quite active. I still love going to art exhibitions and choosing nice color scales for figures, which sometimes the students don't appreciate much.
Blog Post: A deep dive into data acquisition with the LabOne DAQ tool
In this blog post, Moritz Kirste concentrates on data acquisition with the LabOne Data Acquisition (DAQ) tool that is part of all Zurich Instruments lock-in amplifiers. He gives a general introduction to the functional features and walks you through basic examples that will help you to take full advantage of the DAQ capabilities for triggered data acquisition in the time and frequency domains. Looking at the heart of experimental science you will find data acquisition - let's discover why.
Blog Post: Bioimpedance of a muscle contraction with the MFIA
In his impedance blog, Tim Ashworth explores how the Zurich Instruments MFIA Impedance Analyzer can take precise impedance measurements on biological tissue in the frequency and time domains. The blog post presents 4-electrode impedance measurements on a human forearm at rest and during a fist clench. The fist clench induces a phase shift of 0.5 degrees and an absolute impedance shift of 1 Ohm compared with the rest values. Tim finds the phase resolution of the MFIA for this bio-impedance setup to be just 2 millidegrees, which opens up the possibility for much smaller hand movements to be resolved. These measurements will be of interest to anybody measuring bio-impedance of tissues or developing wearable bio-impedance sensors.
Zurich Instruments SPM User Meeting 2020
Following the success of our previous three SPM User Meetings, it is with great pleasure that we announce the organization of the 4th edition. Hosted in France at the Bibliothèque Marie Curie of INSA Lyon, this 2020 event will be an opportunity to broaden your knowledge in the field of scanning probe microscopy, with a focus on the measurement of electrical modes at the nanoscale, and expand the community of Zurich Instruments' super-users. Would you like to hear more about this event? Let us know and keep an eye on the event page for regular updates.
We are hiring
Are you passionate about science, technology, and instrumentation? Join our dynamic team and break new ground in high-end scientific instrumentation created for scientists and engineers in leading laboratories around the world. Be at the cutting edge of technology - we have exciting open positions in R&D, marketing and operations:
Headquarters Zurich, Switzerland
Zurich Instruments USA (Boston)
Zurich Instruments China (Shanghai)
- Application Engineer China
- Application Scientist China (Physics, EE)
- Application Scientist QC China
- Technical Sales China
Recent publications featuring the HF2LI Lock-in Amplifier
- Zhang, M., Chen, Q., Xue, R., Zhan, Y., Wang, C., Lai, J. et al.
Reconfiguration of interfacial energy band structure for high-performance inverted structure perovskite solar cells. Nat. Commun. 10, 4593 (2019).
- López-Fraguasa, E., Arredondo, B., Vega-Colado, C., del Pozo, G., Najafi, M., Martín-Martín, D. et al.
Visible Light Communication system using an organic emitter and a perovskite photodetector. Organic Electronics 73, 292 (2019).
- Zhao, Z., Zheng, X., Ollmann, Z., Hayati, M., Peng, W. & Feurer, T.
Terahertz Selective Emission Enhancement from a Metasurface-Coupled Photoconductive Emitter in Quasi-Near-Field Zone. Plasmonics (2019).